Grout Repair & Regrouting in Englewood

Almost always. As long as the tile itself is sound and the substrate behind it isn't failing, grout can be cut out and re-run without pulling tile. We remove the failed grout to the correct depth, clean the joints, and re-grout with color-matched, mildew-resistant material. Tile replacement is only necessary when tiles are broken, hollow-sounding, or the substrate has water damage.

Yes — we color-match to the surrounding installation using the manufacturer's color chart on-site. For spot repairs, we test on a small section first. For heavily stained old grout where the original color is hard to identify, we recommend renewing a full wall or floor plane so the new joints read consistently.

Yes. Full shower regrouting is a common request: we remove all the failed grout, clean the joints, re-grout with mildew-resistant material, and replace the silicone at every plane change (corners, tub-to-tile seam, curb). Most single showers are a half-day job and are usable again after 24 hours of cure.

Yes. Once the new grout is fully cured (typically 24–72 hours), we can return to seal it with a penetrating grout sealer that resists water, soap film, and staining. Sealing is included on regrouting jobs; on spot repairs it's an optional add-on we quote up front.

Surface mildew often cleans up; deep-set staining that has penetrated the grout usually doesn't. We assess on-site. Where cleaning won't recover the finish, we remove the top layer of grout and re-run the joints — same-day for small areas. Silicone caulk lines with black mildew are always replaced rather than cleaned.

Most single-bathroom grout repairs finish in 2–4 hours. Full shower regrouting is typically a half-day. Add 24 hours of cure time before the shower is back in use, and another 24–72 hours before optional sealing. Kitchen backsplash grout refresh is usually done in a single 2–3 hour visit.

Yes — this is one of the most common Englewood scopes. We map which surface lives where, use lime-compatible compounds on plaster and standard mud on drywall, then blend texture and prime everything before paint so the transitions disappear under normal light.

Often yes. Mid-century Englewood kitchens often have solid wood boxes and well-built doors that look tired but are structurally excellent. Stripping, sanding, bonding primer, and a sprayed enamel topcoat brings them back to current without the cost of replacement.